Sadly we were supplied with a large number of Oak And Teak Epoxy Resin 355ml Squeezy Bottles where the cap was made of the wrong polymer. These caps are degraded by the contents of the bottles – and should be replaced if you have any of them.
Identification of the Bad Tops
The defective bottle tops look like this.
They are 1 Inch (25mm) long and are clearly ribbed.
They crack after exposure to epoxy resins for extended periods.
If your bottle tops look like this, please use the contact form to let us know. Include a name and address and we will mail replacements out to you ASAP without charge.
The Replacement Good Bottle Tops
The good tops, which we will send out as replacements look like this.
Also red they are much shorter, just 10mm high, and they are not ribbed. These do not fail, and do not need to be replaced.